MAP Series
MAP impellers generate the airflow required for extraction and dust abatement systems, supporting the removal of dust and fumes in complex industrial environments. The ability to customise diameter, number of blades and materials makes it possible to achieve optimal performance even under aggressive conditions. The aerofoil profile reduces turbulence and improves efficiency.
Blades:
- Made of extruded aluminium alloy with an aerofoil profile optimised to reduce turbulence and noise.
- Also available in special materials (FRP, PPG) for corrosive environments or ATEX applications.
Hubs:
Types F, P, D, designed for different diameters and loads.
Aluminium alloy or steel structure, with high mechanical strength.
Number of blades: from 3 to 16, configurable according to airflow and pressure requirements.
Available diameters:
- MAP F Series: 350 ÷ 1.000mm
- MAP P Series: 500 ÷ 3.100mm
- MAP D Series: 1.000 ÷ 12.000mm
Blade pitch angle adjustment:
Ability to adjust the blade pitch while stationary to optimise the performance curve.
Operational Technical Parameters
- Maximum tip speed: up to 70 m/s (depending on diameter and configuration).
- Airflow: calculated using Comet Fans software, variable according to diameter, number of blades and pitch angle.
- Dynamic balancing to ISO standards to reduce vibration and extend service life.
Certifications and Standards
- ATEX for environments with explosion risk.
- Compliance with ISO standards for safety and balancing.
- Impellers can be supplied with anti-corrosion treatments for marine or chemical environments.
Competitive Advantages
- Extreme modularity: customisation of diameter, number of blades and hub.
- Noise reduction thanks to the optimised aerofoil profile.
- Energy efficiency: lower consumption for the same airflow.
- Durability: materials and treatments designed for demanding environments.
- Fans for bag filters and extraction systems.
- Dust abatement systems for cement plants, steel plants and chemical industries.
- Fume extraction systems in demanding industrial environments.
Available diameters
- MAP F Series: 350 ÷ 1.000mm
- MAP P Series: 500 ÷ 3.100mm
- MAP D Series: 1.000 ÷ 12.000mm
Number of blades: 3 ÷ 16, configurable
Operational Parameters
- Tip speed: up to 70 m/s
- Operating temperature: -40°C ÷ +80°C
- Airflow: variable according to diameter, blades and pitch (calculated using Comet Fans software)
- Balancing: dynamic in accordance with ISO standards
